Global NX

The LM5575MHX/NOPB is a step-down switching regulator integrated circuit (IC) from Texas Instruments that delivers a constant voltage or current output

Amphenol Sine Systems’ PRM series (panel rack mount) connectors are available in both plug and receptacle styles and are a quick-connect power connector solution for use in panel rack mount network applications. Amphenol's quick-connect design enables denser installations along with faster deployments and upgrades.

Integrated circuits are compact electronic chips that are made up of interconnected components like transistors, resistors, and capacitors. 

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard. The device has the logic input and output buffers separated by a silicon oxide (SiO2) insulation barrier that provides galvanic isolation of up to 5000 VRMS for ISO1050DW and 2500 VRMS for ISO1050DUB. Used in conjunction with isolated power supplies, the device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. As a CAN transceiver, the device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The device is designed for operation in especially harsh environments, and it features cross-wire, overvoltage and loss of ground protection from –27 V to 40 V and overtemperature shutdown, as well as –12V to 12V common-mode range. The ISO1050 is characterized for operation over the ambient temperature range of –55°C to 105°C. 

The H11AA1 is a bi-directional input optically coupled isolator consisting of two inverse parallel gallium arsenide infrared LEDs coupled to a silicon NPN phototransistor in a 6 pin DIP package. The H11AA1 has a minimum CTR of 20 %, a CTR symmetry of 1:3 and is designed for applications requiring detection or monitoring of AC signals.

The ADC0808CCN is an 8-bit analog-to-digital converter (ADC) integrated circuit (IC) from Texas Instruments

The 6N137 is single channel 10 MBd opto-couplers utilizing a high efficient input LED coupled with an integrated optical photodiode IC detector. The detector has an open drain NMOS-transistor output, providing less leakage compared to an open collector Schottky clamped transistor output.

The SN7445N is a BCD-to-decimal decoder and driver integrated circuit (IC) from Texas Instruments

The M27C4001 is a 4 Mbit EPROM offered in the two ranges UV (ultra violet erase) andOTP (one time programmable). It is ideally suited for microprocessor systems requiringlarge programs and is organised as 524,288 by 8 bits.The FDIP32W (window ceramic frit-seal package) has a transparent lid which allows theuser to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then bewritten to the device by following the programming procedure.

The TJA1050 is the interface between the Controller AreaNetwork (CAN) protocol controller and the physical bus.The device provides differential transmit capability to thebus and differential receive capability to the CANcontroller.The TJA1050 is the third Philips high-speed CANtransceiver after the PCA82C250 and the PCA82C251.The most important differences are:• Much lower electromagnetic emission due to optimalmatching of the output signals CANH and CANL• Improved behaviour in case of an unpowered node• No standby mode.This makes the TJA1050 eminently suitable for use innodes that are in a power-down situation in partiallypowered networks.

The AS6C4008 is a 4,194,304-bit low powerCMOS static random access memory organized as524,288 words by 8 bits. It is fabricated using veryhigh performance, high reliability CMOS technology.Its standby current is stable within the range ofoperating temperature.The AS6C4008 is well designed for very low powersystem applications, and particularly well suited forbattery back-up non-volatile memory application.The AS6C4008 op erates from a sing le p owe rsup p ly of 2.7V~ 5.5Vand all inputs and outputs arefully TTL compatible 

Schneider Electric's PowerPacT is an industry-leading multi-standard-compliant range of MCCBs that deliver unrivaled reliability. Suitable for extremely demanding applications, these highly flexible solutions are designed to protect electrical distribution systems from damage caused by overloads and short circuits. The series offers a rating range of 15 A to 3,000 A.

The XTR111 is a precision voltage-to-current converter designed for the standard 0mA to 20mA or 4mA to 20mA analog signals, and sources up to 32mA. The ratio between input voltage and output current is set by a single resistor, RSET. The circuit can also be modified for voltage-output operation. An external P-MOSFET transistor provides high output resistance and a broad-compliance voltage range that extends from 2V less than the supply voltage, VVSP, to voltages far less than ground. The adjustable 3V to 15V subregulator output provides the supply voltage for additional circuitry. The XTR111 is available in 10-pin HVSSOP and VSON surface-mount packages. 

The CM6805AG is an integrated Power Factor Correction (PFC) and PWM combo controller IC designed for high-efficiency AC-DC power supplies. It combines a dedicated PFC stage controller and a PWM controller in a single package, reducing component count and improving system reliability. The device supports continuous-conduction‐mode PFC and offers stable regulation, low distortion, and enhanced energy efficiency—ideal for industrial and high-power SMPS applications.

Global Nx supplies the CM6805AG along with a wide range of industrial, obsolete, and hard-to-find electronic components. As a trusted importer and distributor, we ensure genuine parts, reliable sourcing, and fast delivery for OEM, repair, and production requirements.

✅ Key Features:

• Integrated PFC controller + PWM controller in one IC

• Continuous Conduction Mode (CCM) PFC

• Low Total Harmonic Distortion (THD)

• High power factor >0.95 (system dependent)

• Improved power conversion efficiency

• Soft-start function for controlled startup

• Under-voltage lockout and over-voltage protection

✅ Technical Specifications:

(typical values – for buyer reference)

• Input Voltage (VCC): 10 V – 28 V

• PWM Output Frequency: up to 100 kHz (design dependent)

• Operating Mode: CCM PFC + PWM

• Operating Temperature: –20°C to +85°C

• Package: DIP-16 / SOP-16 (depending on variant)

✅ Applications:

• Industrial SMPS and AC-DC converters

• High-power LED drivers

• Server & telecom power supplies

• Consumer electronics power stages

• Energy-efficient PFC-based power modules

• Repair/replacement for legacy power supplies

📦 Global Nx – Your Source for New, Obsolete & Hard-to-Find Components

We supply:

• Integrated Circuits (ICs)

• Semiconductors & power devices

• Sensors, optocouplers & drivers

• Connectors & industrial modules

As an importer & distributor, we support:
✔ OEMs
✔ R&D labs
✔ Service/repair centers
✔ Production units

The ADS1231 is a precision, 24-bit analog-to-digital 2• Complete Front-End for Bridge Sensors converter (ADC). With an onboard low-noise • Internal Amplifier, Gain of 128 amplifier, onboard oscillator, precision third-order 24- • Internal Oscillator bit delta-sigma (ΔΣ) modulator, and bridge power • Low-Side Power Switch for Bridge Sensor switch, the ADS1231 provides a complete front-end solution for bridge sensor applications including • Low Noise: 35nVrms weigh scales, strain gauges, and load cells. • Selectable Data Rates: 10SPS or 80SPS The low-noise amplifier has a gain of 128, supporting • Simultaneous 50Hz and 60Hz Rejection at a full-scale differential input of ±19.5mV. The ΔΣ ADC 10SPS has 24-bit resolution and is comprised of a third-order • Input EMI Filter modulator and fourth-order digital filter. Two data rates are supported: 10SPS (with both 50Hz and • External Voltage Reference up to 5V for 60Hz rejection) and 80SPS. The ADS1231 can be Ratiometric Measurements put in a low-power standby mode or shut off • Simple, Pin-Driven Control completely in power-down mode. • Two-Wire Serial Digital Interface The ADS1231 is controlled by dedicated pins; there • Supply Range: 3V to 5.3V are no digital registers to program. Data are output • Package: SOIC-16 over an easily-isolated serial interface that connects directly to the MSP430 and other microcontrollers. • Temperature Range: –40°C to +85°C The ADS1231 is available in an SO-16 package and APPLICATIONS is specified from –40°C to +85